Glossary
Podcast Glossary: 111 Terms, Explained Simply
Podcasting borrows words from radio, film, music and marketing, and nobody explains them. This glossary defines the terms you are most likely to hear from a producer, an editor or a podcast app, in plain English, grouped by the stage of the work they belong to.
Jump to: Recording & Audio · Editing & Post-Production · Video & Short-Form · Publishing & Distribution · Growth & Analytics · Monetization · Planning & Formats
23 terms
Recording & Audio
The words you will hear in the studio, or on a remote session.
Acoustic treatment
Panels and soft materials that absorb sound reflections in a room and reduce echo. It is different from soundproofing, which stops sound from getting in or out.
Audio interface
A device that connects XLR microphones to a computer and converts their analog signal into digital audio.
Batch recording
Recording several episodes in a single session so a show stays on schedule with less time on the calendar.
Bit depth
The number of bits used to store each audio sample. A higher bit depth captures a wider range between quiet and loud; 24-bit is a common recording setting.
Clipping
Distortion caused by recording a signal louder than the equipment can handle, which flattens the peaks of the waveform. It cannot be fully repaired afterward, so levels are set to avoid it.
Condenser microphone
A sensitive type of microphone that captures a lot of detail, including the sound of the room. It suits a treated studio better than an ordinary office.
Crosstalk
When one person's voice is picked up by another person's microphone, also called mic bleed. It makes editing harder because the voices can no longer be adjusted separately.
Double-ender
A remote recording method in which each person records their own audio and video locally and the files are combined afterward, so internet glitches do not end up in the finished episode. See remote podcast production.
Dynamic microphone
A type of microphone that mostly picks up what is directly in front of it and ignores much of the room. That makes it forgiving in ordinary spaces and a common choice for podcasting. Our equipment list covers the options.
Gain
The amount of amplification applied to a microphone's signal on the way in. Too low and the recording is noisy once it is raised; too high and it clips.
Headroom
The space between the loudest moment in a recording and the point where it would clip.
Lavalier microphone
A small clip-on microphone worn on clothing, used in video when a visible desk microphone is not wanted.
Mix-minus
An audio setup that sends a remote guest everything in the mix except their own voice, so they do not hear an echo of themselves.
Multitrack recording
Recording each voice or source to its own track so that each one can be edited and balanced independently.
Noise floor
The level of background noise in a recording when nobody is speaking, such as hiss, hum or air conditioning.
Plosive
The burst of air from "p" and "b" sounds hitting the microphone, heard as a low thump.
Polar pattern
The directions from which a microphone picks up sound. Cardioid microphones, the most common pattern in podcasting, pick up mainly from the front.
Pop filter
A screen placed between the speaker and the microphone, or a foam cover on the microphone itself, that reduces plosives.
Remote recording
Recording a show with hosts and guests in different places, connected over the internet. We compare the two approaches in remote recording vs. in-studio.
Room tone
The natural background sound of a recording space. Editors keep a few seconds of it to fill gaps so that cuts sound seamless.
Sample rate
How many times per second audio is measured during recording, given in kilohertz. 44.1 kHz and 48 kHz are the common standards, and 48 kHz is typical for video.
Shotgun microphone
A highly directional microphone, usually mounted out of frame on a boom or on top of a camera, used in video production.
XLR
The three-pin connector used by professional microphones. An XLR microphone needs an audio interface or mixer, while a USB microphone plugs straight into a computer.
22 terms
Editing & Post-Production
What happens between the recording and the finished episode.
Bitrate
The amount of data used for each second of audio, measured in kilobits per second (kbps). A higher bitrate means better quality and a larger file.
Bumper
A short piece of music or sound that marks the move from one segment of an episode to the next. Also called a stinger.
Captions
On-screen text of what is being said. Open captions are part of the video image; closed captions can be switched on and off by the viewer.
Chapter markers
Timestamps that divide an episode into labeled sections, so listeners can jump straight to the part they want.
Color grading
Adjusting the color and contrast of video so that every camera angle matches and the show has a consistent look.
Compression
An audio process that narrows the gap between the loudest and quietest moments so speech sounds even. It is unrelated to file compression, which makes files smaller.
De-esser
A tool that softens harsh "s" and "sh" sounds, known as sibilance.
EQ (equalization)
Adjusting the balance of low, middle and high frequencies in a voice, for example to remove rumble or add clarity.
ID3 tags
Information stored inside an MP3 file, such as the episode title, show name and artwork.
J-cut and L-cut
Edits in which the sound and the picture change at different moments. In a J-cut you hear the next speaker before you see them; in an L-cut the previous speaker's audio carries on over the next picture.
Jump cut
A visible cut within the same camera shot where footage has been removed. It is common in short-form video, where pace matters more than smoothness.
Limiter
A tool that stops audio peaks from going above a set ceiling, protecting the final file from clipping.
Lower third
An on-screen graphic in the lower part of the frame, typically showing a speaker's name and title.
LUFS
Loudness Units relative to Full Scale, the standard measure of how loud a whole program sounds to a listener (also written LKFS). Platforms publish loudness targets so shows play at a consistent volume: Apple Podcasts recommends about -16 dB LKFS, within 1 dB either way, with true peaks no higher than -1 dB FS.
Mastering
The final audio step, in which overall loudness, tone and peaks are set so the episode is ready for release.
Mixing
Balancing the levels of every voice, plus any music and sound effects, so the episode sounds like one coherent piece.
Noise gate
A tool that lowers or mutes a microphone whenever its signal falls below a set level, hiding background noise between sentences.
Noise reduction
Processing that removes steady background noise such as hiss, hum or fan noise from a recording.
Post-production
Everything done after recording: editing, mixing, mastering, color, graphics and export. See podcast editing and post-production.
Rough cut
The first assembled version of an episode, before fine editing, sound work and graphics.
Show notes
The written summary published with an episode, usually with key points, links and timestamps. Here is how to write podcast show notes.
Transcript
The full written text of an episode. It makes a show accessible to people who cannot listen and gives search engines words to read.
13 terms
Video & Short-Form
Terms from the camera side of a video podcast.
4K
A video resolution of 3840 by 2160 pixels. The extra detail gives an editor room to crop into a shot, which is useful when cutting vertical clips from a wide frame.
A-roll
The primary footage of a video, which in a podcast means the people talking.
Aspect ratio
The shape of the video frame. 16:9 is the horizontal format used for full episodes on YouTube, 9:16 is the vertical format used for Reels, TikTok and YouTube Shorts, and 1:1 is square.
Audiogram
A still image or animated waveform combined with a short piece of episode audio and captions, used to share audio-only moments on social media.
B-roll
Supplementary footage shown over the main audio, such as a product, a location or a screen recording.
Cold open
Starting an episode with a strong moment from later in the conversation, before any introduction, to give people a reason to stay.
Frame rate
The number of still images shown per second of video, written as fps. 24 and 30 fps are the most common choices for conversation.
Hook
The first few seconds of an episode or clip, built to earn the next few seconds of attention.
Multi-camera
Recording with several cameras at once so the edit can cut between a wide shot and a close-up of each speaker. Often shortened to multicam.
Short-form clip
A short video, usually under a minute, cut from a longer episode for Reels, TikTok and YouTube Shorts. See short-form clips and our guide to turning episodes into clips.
Thumbnail
The still image that represents a video on YouTube and in search results. Together with the title, it decides whether people click.
Vertical video
Video in a tall 9:16 frame, made to fill a phone screen.
Video podcast
A podcast that is filmed as well as recorded, and published as video on YouTube and Spotify alongside the audio version. See video podcast production and audio-only vs. video.
17 terms
Publishing & Distribution
How an episode gets from a file to a listener's phone.
Back catalog
All of a show's previously published episodes.
Cover art
The square image that represents a show in every podcast app. Apple Podcasts accepts show covers from 1400 by 1400 to 3000 by 3000 pixels, in PNG or JPG, and prefers the largest size.
Distribution
Getting each episode into the places people listen and watch, such as Spotify, Apple Podcasts and YouTube. Our guide shows how to submit a podcast to Spotify and Apple Podcasts.
Embed player
A playable episode placed directly on a web page, so visitors can listen without leaving the site.
Enclosure
The part of an RSS feed entry that points to an episode's media file. It is how a podcast app knows what to play.
Episode type
A label in the feed that marks an episode as full, a trailer or a bonus, so apps can display each one correctly.
Evergreen content
Episodes that stay useful long after they are published, as opposed to ones tied to the news.
Explicit tag
A feed setting that tells podcast apps whether a show or episode contains explicit language or content.
GUID
A unique identifier attached to each episode in an RSS feed. If it changes, apps may treat an old episode as a new one.
Podcast directory
An app or website where people find and play podcasts, such as Apple Podcasts or Spotify. Most directories read your RSS feed instead of storing your show themselves.
Podcast host
The service that stores your episode files and generates your RSS feed. Also called a hosting platform; not to be confused with the person who hosts the show. We compare the options in best podcast hosting platforms.
Private feed
An RSS feed available only to chosen listeners, used for internal company podcasts and for paid content.
Publishing cadence
How often a show releases new episodes. We cover the trade-offs in how often to publish a podcast.
RSS feed
A file, kept up to date by your podcast host, that lists your show's details and every episode. Podcast apps read it to display your show and to fetch new episodes automatically.
Season
A group of episodes released together or around one theme, usually with a break before the next group.
Show type
A feed setting that is either episodic or serial. Episodic shows list the newest episode first and can be heard in any order; serial shows are meant to be heard from the first episode onward.
Trailer
A short preview of a show. It is often published before the first full episode so the show can be listed in directories ahead of launch.
14 terms
Growth & Analytics
The numbers that describe an audience, and the ways to build one.
Audience retention
A measure of how much of a video or episode people actually play, usually shown as a graph across its length.
Call to action
The one thing you ask the audience to do next, such as booking a call, joining an email list or following the show. Often shortened to CTA.
Click-through rate
The share of people who click on a video after being shown its thumbnail and title. Often shortened to CTR.
Completion rate
The share of listeners who play an episode to the end.
Content repurposing
Turning one recording into many pieces of content: a full episode, clips, quotes, a blog post and an email. See podcast vs. YouTube vs. short-form.
Cross-promotion
Two shows with similar audiences recommending each other. It is one of the methods in how to grow a podcast audience.
Download
A request for an episode's media file from the podcast host, whether the episode is played immediately or saved for later. Hosts that follow the IAB Tech Lab podcast measurement guidelines filter out bots and repeated requests before reporting the number.
Drop-off point
A moment in an episode where a noticeable share of the audience stops listening or watching.
Follower
Someone who has followed a show in a podcast app so that new episodes appear automatically. Some apps use the word subscriber for the same thing.
Impressions
The number of times a video's thumbnail was shown to people on a platform.
Lead magnet
A free resource offered in return for an email address, used to turn listeners into contacts. See the podcast-to-email-list funnel.
Podcast ROI
What a show returns to the business compared with what it costs, counted in leads, clients and revenue. Here is how to measure podcast ROI.
Podcast SEO
Making a show and its episodes easier to find in search engines and inside podcast and video apps, through titles, descriptions, show notes and transcripts. See our guide to YouTube podcast SEO.
Watch time
The total time viewers have spent watching a video or a channel.
9 terms
Monetization
The ways a show makes money, directly and indirectly.
Affiliate marketing
Earning a commission when listeners buy a product through a host's link or code.
Baked-in ad
An ad that is part of the episode's audio file permanently, so every future listener hears the same one.
Branded podcast
A show produced by a company to build trust and authority with its own customers, where the return comes from the business the show brings in. We explain the model in how to monetize a business podcast.
CPM
Cost per mille, the price an advertiser pays for every thousand downloads or views of an ad.
Dynamic ad insertion
Technology that places ads into an episode at the moment it is downloaded, so ads can be changed across every episode, old and new, at any time. Often shortened to DAI.
Host-read ad
An ad read by the show's host in their own voice and words.
Pre-roll, mid-roll and post-roll
The three ad positions in an episode: before the content starts, during it, and after it ends.
Sponsorship
A company paying to be associated with a show, typically in return for ad reads and mentions over a set period.
13 terms
Planning & Formats
The vocabulary of planning a show before anyone presses record.
Co-hosted format
A show built around a conversation between two or more regular hosts.
Content calendar
The schedule of planned episodes, guests and release dates.
Done-for-you production
A service in which a production company handles recording, editing, clips and distribution, so the host only has to show up and talk. See our services and what a podcast production company does.
Interview format
A show in which a host talks with a different guest each episode. See how to find podcast guests and our interview questions.
Intro and outro
The opening and closing of an episode. The intro tells new listeners what the show is and why to stay; the outro tells them what to do next.
Launch
The release of a show's first episodes and the promotion around it. See the podcast launch checklist and our Podcast Launch program.
Pilot episode
A test episode recorded to try out a format before committing to it.
Pre-interview
A short conversation with a guest before the recording, used to find the best stories and agree what the episode will cover.
Roundtable
A show format in which three or more people discuss a topic together. Also called a panel.
Run of show
The ordered outline of an episode: its segments, their timing and who speaks when.
Segment
A distinct part of an episode, often one that returns every week under the same name.
Show format
The basic shape of a show: interview, solo, co-hosted, roundtable or narrative. We compare them in how to choose a podcast format.
Solo format
A show in which one host speaks directly to the audience without a guest.
Would you rather not learn all of this?
That is what done-for-you production is for. Book a free 30-minute strategy call and we will handle the recording, editing, clips and distribution.